*Opening Session*
21:00-21:10 Chairperson: Minoru Tsuda, Conference Chair of ICPST-38
Opening Remarks
Takeo Watanabe, Symposium Chair of EUV Lithography, the Symposium of most contributing to Journal of Photopolymer Science and Technology, 33 (2020)
*Plenary Session*
21:10-21:55 Chairpersons: Takeo Watanabe, University Hyogo and Tomoki Nagai, JSR
Plenary Lecture A-1 Development of Materials Infomatics Platform
Yasumitsu Orii, Hiroyuki Toda, Shuichi Hirose, Masakazu Kobayashi, NAGASE
*Panel Symposium I: “EUV Lithography toward 10 nm and below – Prospect of Achievement for Both Highly Sensitive and low LWR EUV Resist –”*
21:55-23:30 Chairperson: Takeo Watanabe, University of Hyogo
Panel Symposium: “EUV Lithography toward 10 nm and below – Prospect of Achievement for Both Highly Sensitive and low LWR EUV Resist –”
EUV lithography is started to use for production of 7-nm logic device. In this panel symposium, highly sensitive and low LWR resist is required for future nodes. The prospect of the achievement for those
characteristics are discussed by the panelists which are the experts in this field.
Panelist:
Toru Fujimori (Fujifilm)
Danilo De Simone (IMEC)
Florian Gstrein (Intel)
Makoto Muramatsu (TEL)
Organizer:
Takeo Watanabe and Shinji Yamakawa (Univ. of Hyogo),
Taku Hirayama (HOYA)
Hiroaki Oizumi (Gigaphoton)
Hiroto Kudoh (Kansai Univ.)
*Panel Symposium II: “Biomimetics: Learn from Nature”*
21:30-23:30 Chairperson: Hiroyuki Mayama, Asahikawa Medical University, Atsushi Sekiguchi, Litho Tech Japan, Osaka Prefecture University
Panel Symposium: “Biomimetics: Learn from Nature”
Various functions, for example, adhesion, superhydrophobicity, self-cleaning, antifouling and low friction, can be seen on the surfaces of plants, insects, spiders, geckoes, and aquatic animals with different surface structures. The scales of these surface structures are widely distributing from nm to mm. In this panel symposium, we will discuss challenging topics in the interdisciplinary area between
nature-created technology, microfabrication technique and applications.
Panelist:
Prof. Stanislav Gorb, Kiel University "Biological Adhesion as an Inspiration for Biomimetics"
Takahiko Hariyama, Hamamatsu University "NanoSuit for Biomimetic Innovation"
Kaoru Uesugi, Ibaraki University "Force Measurement for Elucidating Functions of Surface Micro-structures of Living Things"
Fujio Tsumori, Kyushu University "Fabrication of Biomimetic Funcitional Surfaces; (1) Hierarchical Structure and (2) Ciliated Surface"
Atsushi Hozumi, National Institute of Advanced Industrial Science and Technology (AIST) "Development of Self-Healable Superhydrophobic and Superhydrophilic Materials"
Shigeru Deguchi, Japan Agency for Marine-Earth Science and Technology (JAMSTEC) "Biomimetics for Sustainable Use of Marine Bioresources in Circular Economy"
On-demand streaming will be available after the Plenary session, which means it will start at 21:55 on June 15th and end at 23:59 on July 14th.
Q & A will be held at chat during this period.
*Nanobiotechnology*
A-2 Design of a Hairpin DNA-Gold Nanoparticle Monoconjugate with a Single-Dye Molecule for Targetable Molecular Beacon Strategies [Invited]
Akane Mukaida (1), Rihito Adachi (1), Yoshitsugu Akiyama (2), Masao Kamimura (1), (1) Department of Materials Science and Technology, Graduate School of Industrial Science and Technology, Tokyo University of Science, (2) Faculty of Industrial Science and Technology, Tokyo University of Science
A-3 Experimental Evaluation and Modeling of Adsorption Phenomena of Nanoliposomes on Poly(dimethylsiloxane) Surfaces
Sylvan Sunny Koyagura (1), Virendra Majarikar (1), Hiroaki Takehara (1,2), Takanori Ichiki (1,2), (1) The University of Tokyo, (2) Innovation Center of NanoMedicine (iCONM)
A-4 Near-Infrared Afterglow Ceramic Fluorophore Coupled with Dyes in Polymer Matrix
Shengjie Fang, Masakazu Umezawa, Kyohei Okubo, Kohei Soga, Tokyo University of Science
A-5 Photopolymerization Triggered by Upconversion Emission for Hydrophobic Shell Coating on Lanthanide-Doped NaYF4 Nanoparticle Surface
Kyohei Okubo, Takaya Yamada, Hikaru Haraguchi, Masao Kamimura, Masakazu Umezawa, Kohei Soga, Tokyo University of Science
A-6 Characterization of Bipolar Electrospinning and Its Application to Nanofiber Assembly
Naoya Takahashi(1), Hiroaki Takehara(1,2), Takanori Ichiki(1,2), (1) The University of Tokyo, (2) Innovation Center of NanoMedicine (iCONM)
A-7 Effects of Physico-chemical Treatments on Interconnections among PLGA 50:50 Electrospun Nanofibers
Afraz Khan (1), Yuki Hadano (1), Hiroaki Takehara (1,2), Takanori Ichiki (1,2), (1) The University of Tokyo, (2) Innovation Center of NanoMedicine (iCONM)
A-8 Microfabrication process of metal wires on poly(l-lactide)(PLLA) substrates using laser ablation
Kazuki Shimada (1), Hiroaki Takehara (1,2), Takanori Ichiki (1,2), (1) The University of Tokyo, (2) Innovation Center of NanoMedicine (iCONM) A-9 Elastoplastic finite element analysis of polymer microneedles with high aspect ratio
Mizuki Inada (1), Yukihiro Kanda (1), Hiroaki Takehara (1, 2), Takanori Ichiki (1, 2), (1) The University of Tokyo, (2) Innovation Center of NanoMedicine (iCONM)
*Directed Self Assembly (DSA)*
Keynote Lecture A-10 A New Technology for Back-illuminated Complementary Metal Oxide Semiconductor Image Sensor Integrated by Directed Self Assembly Process
Itaru Oshiyama, Takushi Shigetoshi, Isao Mita, Nobuto Sumitani, Takashi Oinoue, Suguru Saito, Tatsuya Okawa, Yoshiki Ebiko, Kaito Yokochi, Yoshiaki Kitano, Yoshiya Hagimoto, Tomoyuki Hirano, Hayato Iwamoto, Sony Semiconductor Solutions Corporation
Keynote Lecture A-11 Next-Generation Directed Self-Assembly for Moore's Law Scaling [Invited]
Florian Gstrein, Intel Corporation
A-12 Self-Assembly of Carbohydrate-based Block Copolymers : Highly Nanostructured Thin Films [Invited]
Redouane Borsali, University Grenoble Alpes - CNRS
A-13 Development of Directed Self-Assembly Process toward High Volume Manufacturing [Invited]
Hyo Seon Suh,Imec
A-14 Recent Progress on DSA at CEA-Leti [Invited]
Guido Rademaker, Aurélie Le Pennec, Marie-Line Pourteau, Tommaso Giammaria, Khatia Benotmane, Hanh Pham, Maria-Gabriëla Gusmão Cacho, Ahmed Gharbi, Maxime Argoud, Nicolas Posseme, Raluca Tiron, Univ. Grenoble-Alpes, CEA, Leti
A-15 Defect Mitigation in Sub-20 nm Patterning with High-Chi Silicon Containing Block Copolymers [Invited]
Jan Doise (1), Jai Hyun Koh (2), Ji Yeon Kim (2), Qingjun Zhu (2), Natsuko Kinoshita (2), Hyo Seon Suh (1), Paulina Rincon Delgadillo (1), Geert Vandenberghe (1), C. Grant Willson (2), Christopher J. Ellison (3), (1) Imec, (2) University of Texas at Austin, (3) University of Minnesota
A-16 Multi-functional Top-Coats Strategy for DSA of High-χ Block Copolymers [Invited]
Xavier Chevalier (1), Cindy Gomes Correia (2), Gwenaelle Pound-Lana (3), Philippe Bézard (3) (4), Matthieu Sérégé (3), Camille Petit-Etienne(3), Guillaume Gay (3), Gilles Cunge(3), Benjamin Cabannes-Boué (2), Célia Nicolet (1), Christophe Navarro (1), Ian Cayrefourcq (1)(5), Marcus Müller (6), Georges Hadziioannou (2), Ilias Iliopoulos (7), Guillaume Fleury (2), Marc Zelsmann (3), (1) ARKEMA, (2) Univ. Bordeaux, (3) Univ. Grenoble Alpes, CNRS, CEA/LETI Minatec, (4) IMEC, (5) I-TEN SA, (6) Georg-August Universität Göttingen, Institute for Theoretical Physics, (7) Laboratoire PIMM, Arts et Métiers Institute of Technology, CNRS, Cnam, HESAM Université
A-17 Electric-Field Directed Orientation in Fluorine-Containing Block Copolymer Films [Invited]
Du Yeol Ryu, Seongjun Jo, Seungbae Jeon, Taesuk Jun, and Hui Il Jeon, Department of Chemical & Biomolecular Engineering, Yonsei University
*Computational / Analytical Approach for Lithography Processes*
A-18 EUV Stochastics: CD variability and Pattern Failures [Invited]
Peter De Bisschop, imec
A-19 Stochastic Photoresist Defect Formation: An In Silico Investigation [Invited]
Lawrence S. Melvin III, Hironobu Taoka, Ulrich Welling,
Wolfgang Demmerle, Hans-Jurgen Stock, Synopsys
A-20 Resist thickness dependence of latent images in chemically amplified
resists used for electron beam lithography [Invited]
Takahiro Kozawa(1) and Takao Tamura (2), (1) Osaka University, (2) NuFlare Technology, Inc.
A-21 Tight-Binding Quantum Chemical Molecular Dynamics Simulations on Atomistic Mechanism of Plasma Etching Processes [Invited]
Momoji Kubo, Institute for Materials Research, Tohoku University
A-22 Computational Study of Stochastic Effects in Extreme Ultraviolet Lithography [Invited]
Masaaki Yasuda, Masanori Koyama, Kyohei Imai, Masamitsu Shirai, Yoshihiko Hirai, Osaka Prefecture University
A-23 Multiscale polymer simulations with automated coarse-graining technique and quantum annealing [Invited]
Kenji Yoshimoto, Toray
A-24 Stochastic Simulation of Development Process in Electron Beam Lithography
Bunta Inoue (1), Masanori Koyama (1), Atsushi Sekiguchi (2), Masamitsu Shirai (1), Yoshihiko Hirai (1), Masaaki Yasuda (1), (1) Osaka Prefecture University, (2) Litho Tech Japan
A-25 Computational Lithography for 3-Dimensional Fine Photolithography using Sophisticated Built-in Lens Mask
Tomoaki Osumi, Akio Misaka, Kousuke Sato, Masaaki Yasuda, Masaru Sasago, Yoshihiro Hirai, Osaka Prefecture University
*EUV Lithography*
Keynote Lecture A-26 Fundamental Evaluation of Resist on EUV Lithography at NewSUBARU Synchrotron Light Facility (50 min)
Takeo Watanabe, Tetsuo Harada, Shinji Yamakawa, University of Hyogo
A-27 The Research and Development Progress of the High Power LPP-EUV Light Source
Koichiro Koge, Hirokazu Hosoda, Shinji Nagai, Yoshifumi Ueno, Takashi Suganuma, Takayuki Yabu, Tatsuya Yanagida, Yutaka Shiraishi, Hiroaki Nakarai, Hakaru Mizoguchi, Gigaphoton
A-28 High-NA EUV Lithography Exposure Tool: Providing High Contrast to Resist [Invited] (30 min)
Gijsbert Rispens, Jan van Schoot, Ruben Maas, Eelco van Setten, Kars Troost, Rudy Peeters, Sjoerd Lok, Jo Finders, ASML
A-29 Progress and Outlook towards High-NA EUV Materials
Jara G. Santaclara (1), Gijsbert Rispens (1), Joost Bekaert (2), Arame Thiam (2), Mark Maslow (1), Rik Hoefnagels (1), (1)ASML, (2)IMEC
A-30 Challenges in Pushing EUV Lithography to the Atomic Scale [Invited] (30 min)
Patrick Naulleau, Berkeley Lab
A-31 Photoresist Readiness for N3/N2 Double Patterning in EUV lithography [Invited] (30 min)
Danilo De Simone, Stefan Decoster, IMEC
A-32 Novel EUV Resist Materials with Improved Stochastics - A Progress Report [Invited] (30 min)
Florian Gstrein, Intel Corporation
A-33 The Status of Stochastic Issues in EUV Lithography, Photon Stochastic and Chemical Stochastic [Invited] (30 min)
Toru Fujimori, FUJFILM
A-34 Randomness of Polymer Microstructure in the Resist Film as Shot Noise [invited] (30 min)
Makoto Muramatsu(1), Satoru Shimura(2), Arisa Hara(2), Advanced Technology Development Department, (1)Tokyo Electron Kyushu, Process Technology Department, (2)Tokyo Electron Kyushu
A-35 Surface Variation Characterization on Chemical Amplified Photoresist for Extreme Ultraviolet Lithography Stochastic Effects
Eric C. Liu, Amir Hegazy, Hyeonseon Choi, Robert Brainard, Gregory Denbeaux, State University of New York, Polytechnic Institute
A-36 Affinity Analysis of Photoacid Generator in the Thin Film of Chemical Amplification Resist by Contact Angle Measurement
Shinji Yamakawa (1), Ako Yamamoto (1), Seiji Yasui (2), Takeo Watanabe (1), Tetsuo Harada (1), (1) University of Hyogo, (2) San-Apro Ltd.
A-37 New Approaches to EUV Photoresists: Expanding the Polymer Toolbox [Invited] (30 min)
Jingyuan Deng (1), Florian Kaefer (2), Sean Bailey (2), Yusuke Otsubo (2,3), Christopher K. Ober (2), Department of Chemistry and Chemical Biology, (1)Cornell University, Department of Materials Science & Engineering, (2)Cornell University, (3)JSR
A-38 Multi-Trigger Resist for EUV Lithography [Invited] (30 min)
C. Popescu (1), G. O'Callaghan (1), A. McClelland (1), J. Roth (2), T. Lada (2), T. Kudo (3), R. Dammel (3), M. Moinpour (3), Y. Cao (3), A.P.G. Robinson (1), (1)Irresistible Materials, (2)Nano-C, (3)EMD Performance Materials
A-39 EUV Photochemistry of α-Substituted Antimony Carboxylate Complexes [Invited] (30 min)
Michael Murphy, Maximilian Weires, Nitinkumar S. Upadhyay, Philip Schuler, Shaheen Hasan, Greg Denbeaux, Robert L. Brainard, SUNY Polytechnic Institute
A-40 Development of Negative-Type Molecular Ion Resist Materials using Polarity Change by EUV Exposure
Kohei Fujisawa (1), Hiroyuki Maekawa (1), Hiroto Kudo (1), Kazumasa Okamoto (2), Takahiro Kozawa (2), (1)Kansai University, (2)Osaka University
A-41 Progress in EUV Photoresists for High-Resolution Patterning
Yusuke Otsubo (1,2), Hong Xu (1), Emmanuel P. Giannelis (1), Christopher K. Ober (1), (1)Cornell University, (2)JSR
A-42 Study on Irradiation Effects by Femtosecond-pulsed Extreme Ultraviolet in Resist Materials [Invited] (30 min)
Hiroki Yamamoto, Yuji Hosaka, Masahiko Ishino, Thanh-Hung Dinh, Masaharu Nishikino, Yasunari Maekawa, National Institutes for Quantum and Radiological Science and Technology (QST)
A-43 A Holistic Approach to Understanding the Ultrafast Molecular Dynamics of Resist During EUV Exposure: An Introduction to imec's AttoLab for Ultrafast Kinetics and Sub-20 nm Pitch Lithography [Invited] (25 min)
John Petersen (1), Kevin M. Dorney (1), Fabian Holzmeier (1), Esben W. Larsen (1), Thomas Nuytten (1), Dhirendra P. Singh (1), Michiel van Setten (1), Pieter Vanelderen (1), Clayton Bargsten (2), Seth L. Cousin (2), Daisy Raymondson (2), Eric Rinard (2), Rod Ward (2), Henry Kapteyn (2,3), Stefan Böttcher (4), Oleksiy Dyachenko (4), Raimund Kremzow (4), Marko Wietstruk (4), Geoffrey Pourtois (1), Paul van der Heide (1), (1)IMEC, (2)KM Labs, (3)University of Colorado Boulder and NIST, (4)SPECS GmbH
A-44 Evolution of Secondary Electrons Emission During EUV Exposure in Photoresists
Roberto Fallica(1), Stefano Nannarone(2), Nicola Mahne(2), Andrea Marco Malvezzi(2), Danilo De Simone(1), (1)IMEC, (2)CNR-IOM synchrotron beamline BEAR (Elettra synchrotron)
A-45 The Measurement of the Refractive Index n and k Value of the EUV Resist by EUV Reflectivity Measurement Method
Yosuke Ohta (1), Jun Sekiguchi (1), Shota Niihara (2), Tetsuo Harada (2), Takeo Watanabe (2), (1)Litho Tech Japan, (2)University of Hyogo
A-84 Polymerizable Olefins Groups in Antimony EUV Photoresists
Michael Murphy, Nitinkumar S. Upadhyay, Munsaf Ali, James Passarelli, Jodi Grzeskowiak, Maximilian Weires, Robert L. Brainard, SUNY Polytechnic Institute
*Nanoimprint Lithography*
A-46 Resin Deformation Analysis in UV Imprint Considering UV Shrinkage, Thermal Deformation, and Thermochemical Kinetics [Invited] (30 min.)
Yuki Onishi (1), Ryunosuke Yamashita (1), Kenji Amaya (1), Yoshihiko Hirai (2)
(1) Tokyo Institute of Technology, (2) Osaka Prefecture University
A-47 Impact of Water Treatment Reactor using TiO2 Coated Micro Pillar Made by UV-NIL
Kazuki Daigo (1), Ryota Akama (1), Noriyuki Unno (2), Shin-ichi Satake (1), 〇Jun Taniguchi (1), (1) Tokyo University of Science, (2) Tokyo University of Science, Yamaguchi
A-48 Self-forming of Moth-eye Nanostructures on UV-cured Polymer using Oxygen Plasma Etching for Anti-reflection Coating
Takao Okabe, Jun Taniguchi, Tokyo University of Science
A-49 Fabrication of Thin Resin Film with Small Through Holes by Low Temperature Nanoimprint Process
Hiroaki Kawata, Shingo Shimizu, Hideki Tanabe, Masaaki Yasuda, Hisao Kikuta, Yoshihiko Hirai, Osaka Prefecture University
A-50 Molecular Dynamics Study of Resist Filling Process in UV-nanoimprint Lithography
Hiroki Uchida, Ryosuke Imoto, Takao Okabe, Jun Taniguchi, Tadashi Ando, Tokyo University of Science
A-51 Molecular Dynamics Study on the Filling Process of Molecular Weight Dispersive Resist into Nanoscale Cavities
Keisuke Nakajima, Ryuhei Yamamura, Yuya Miyashita, Miyashita, Masaaki Yasuda, Yoshihiko Hirai, Osaka Prefecture University
A-52 Proposal of Hybrid Deep Learning Systems for Process and Material Design in Thermal Nanoimprint Lithography,
Sou Tsukamoto, Kai Kameyama, Hidekatsu Tanabe, Ryuhei Yamamura, Hiroaki Kawata, Masaaki Yasuda, Yoshihiko Hira, Osaka Prefecture University
*Photopolymers in 3-D Printing/Additive Manufacturing*
Keynote Lecture A-53 Multi-material 3D Printing using Photopolymers (40min)
Shoji Maruo, Yokohama National University
A-54 Novel Multi-material-multi-photon 3D Printing with Fast In-situ
Material Replacement for Wafer-level Applications
Y. Gao, S. Toukabri, Y. Yu, A. Richter, R. Kirchner, TU Dresden, Institute of Semiconductors and Microsystems Technology Chair
A-55 Flexible and Semi-Transparent Antenna for ISM Band by Direct Laser
Writing [Invited]
Ashiqur Rahman, Akira Watanabe, Tohoku University
A-56 Co-based Micropatterning on Polymer Substrates in Ambient
Atmosphere using Femtosecond Laser Reductive Sintering of Cobalt Oxide Nanoparticles [Invited]
Mizue Mizoshiri (1), Kyohei Yoshidomi (1), Namsrai Darkhanbaatar (1), Evgeniia Khairullina (2), Maxim Panov (2), Ilya I. Tumkin (2), (1) Nagaoka University of Technology, (2) St. Petersburg State University
*2D and Stimuli Responsive Materials for Electronics & Photonics*
A-57 2D and Stimuli Responsive Materials for Electronics and Photonics: An Overview (15 min.)
Shu Seki, Kyoto University Canceled
A-58 Photoresponsive Liquid Crystalline Polymer Brush via Block Copolymer Surface Segregation in a Binary Mixture Film
Koji Mukai (1), Mitsuo Hara (1), Takahiro Seki (1), Shusaku Nagano (2), (1) Nagoya University, (2) Rikkyo University
A-59 Design of Self-assembly in Phospholipid Membrane [Invited]
Noriyuki Uchida, Yunosuke Ryu, Anju Kawakita, Takahiro Muraoka, Tokyo University of Agriculture and Technology
A-60 Photoinduced Aggregation and Emission Control of an Amphiphilic Azotolane Liquid Crystal
Anna Tamai, Ayumi Kobayashi, Kohei Iritani, Takashi Yamashita, Tokyo University of Technology
A-61 Properties of Imidazolimium-containing Multiblock Amphiphile in Lipid Bilayer Membranes
Miki Mori, 〇Kazushi Kinbara, Tokyo Institute of Technology
A-62 Reversible Thermal Shape Deformation of Main chain Liquid Crystalline Polymers Composed of Phenylene Bis Benzoate Moieties
Ryoma Amanuma, Ayumi Kobayashi, Kohei Iritani, Takashi Yamashita, Tokyo University of Technology
A-63 Local Spatial Distribution of Molecularly-oriented J-aggregates on Poly(tetrafluoroethylene) Alignment Layers [Invited]
Tetsuya Aoyama(1), Jian Yu(2), Hee-Soo So(2), Junna Kawaguchi(2), Shinya Matsumoto(1, 2), Masamitsu Ishitobi(3), Hirohito Umezawa(4), Atsuya Muranaka(1), Masanobu Uchiyama(1, 5), Toshihiko Tanaka(1, 4), (1)RIKEN CPR, (2)Yokohama Nat. Univ., (3)ASET Sumitomo Chemical Lab., (4)Nat. Inst. Tech., Fukushima College, (5)Univ. of Tokyo
A-64 Solution-Processable Free-Standing Thermoelectric Films Using Thermally Cleavable Polythiophene Derivatives [Invited]
Masuki Kawamoto (1-3), Pan He (1,4), Satoshi Shimano (1), Krishnachary Salikolimi (1), Takashi Isoshima (2), Yohei Kakefuda (5), Takao Mori (5), Yasujiro Taguchi (1), Yoshihiro Ito (1,2), (1) RIKEN, Center for Emergent Matter Science, (2) RIKEN Center for Pioneering Research, (3) Graduate School of Science and Engineering, Saitama University, (4) Changchun University of Science and Technology, (5) WPI-MANA, National Institute for Materials Science
A-65 Construction of Monolayer with Aggregation-Induced Emission Effect at the Air/Water Interface using Tetraphenylethylene Derivative Having Long Alkyl Chains [Invited]
Kohei Iritani, Yoshitaku Matsubara, Keijiro Ikuta, Takashi Yamashita, Tokyo University of Technology
A-66 Oriented Nanowire Arrays with Phthalocyanine - C60 Multi-Hetero Junctions
Nobuoka Masaki (1), Koshi Kamiya (1), Shugo Sakaguchi (1), Tsuneaki Sakurai (2) Shu Seki (1), (1) Kyoto University, (2) Kyoto Institute of Technology
A-67 Electrochromic Devices with 2D Metallo-Supramolecular Polymers
Masayoshi Higuchi, Manas K. Bera, Sanjoy Mondal, National Institute for Materials Science
*Strategies and Materials for Advanced Packaging, Next Generation MEMS, Flexible Devices*
Keynote Lecture A-68 Enabling Materials for System-in-Package (SiP) (50min)
Tanja Braun (1), Karl-Friedrich Becker (1), Michael Töpper (1), Martin Schneider-Ramelow (2), (1) Fraunhofer IZM, (2) Technical University of Berlin
A-69 Material and Process Solutions for Advanced Packaging [Invited]
Kazuyuki Mitsukura, Masaya Toba, Showa Denko Materials
A-70 Advanced Build-up Materials for Next Generation Package [Invited]
Masahiro Karakawa, Research Institute For Bioscience Products & Fine Chemicals, Ajinomoto Co., Ltd.
A-71 Mechanistic Analysis using Time-resolved Measurement of Polycinnamate Film
Kenji Takada, Tatsuo Kaneko, Japan Advanced Institute of Science and Technology
A-72 Application of Decarboxylation Reactions on Improvement of Dielectric Properties of a Methacrylic Polymer
Bao Li (1), Hiroshi Matsutani (1), Mika Kimura (1), Masato Miyatake (1), Yasuharu Murakami (1), Sadaaki Katoh (2), Akitoshi Tanimoto (2), Xiaodong Ma (3), Xuesong Jiang (3), (1)Showa Denko Materials, (2)SD Materials (Suzhou), (3)Shanghai Jiao Tong University
A-73 Micropatterning Performance and Physical Characteristics of Water-soluble High Molecular Weight Polysaccharide Photoresist Materials
Toru Amano (1,2), Makoto Kobayashi (2), Satoshi Takei (1), (1)Toyama Prefectural University, (2)Gunei Chemical Industry
A-74 Effect of Sugar Chain Binding Mode on Water-soluble Micropatterning Performance and Physical Characteristics
Toru Amano (1,2), Makoto Kobayashi (2), Satoshi Takei (1), (1)Toyama Prefectural University, (2)Gunei Chemical Industry
A-123 Fabrication of X-ray Collimators by X-ray Lithography Using Synchrotoron Radiation
Shunya Saegusa (1), Noriyuki Narukage (2), Yuichi Utsumi (1), Akinobu Yamaguchi (1), (1) University of Hyogo, (2) NINS, National Astronomical Observatory of Japan
A-75 Design Challenges of Organic Dielectric Materials for Next Generation Packaging Applications [Invited] (25 min.)
Sanjay Malik, FUJIFILM Electronic Materials U.S.A.
A-76 Reliability Simulation of Redistribution Layer Interface in Fan-out Wafer Level Packaging [Invited] (25 min.)
Yuji Okada(1), Atsushi Fujii(1), Kenta Ono(2), Yoshiharu Kariya(3), (1)Asahi Kasei, (2)Graduate School of Shibaura Institute of Technology, (3)Department of Materials Science and Engineering, Shibaura Institute of Technology
A-77 Rheological & Adhesion Considerations in Characterization of Organic Dielectric Dry Film for Advanced Packaging Applications
Stephanie Dilocker, Sanjay Malik, Michaela Connell, Binod De & William Reinerth, FUJIFILM Electronic Materials U.S.A.
A-78 Low Stress and Low Temperature Curable Photosensitive Polyimide
Yu Shoji, Keika Hashimoto, Yutaro Koyama, Yuki Masuda, Hitoshi Araki, Masao Tomikawa, Toray Industries
A-79 Effect of Cross-linker on Photosensitive Polyimide to Achieve Full Imidization and Lower Stress for Good Reliability
Ayaka Azuma, Satoshi Abe, Mamoru Sasaki, HD MicroSystems
A-80 Purification Method for Achieving Low Trace Metals in Ultra-high Purity Chemicals
Mitsuaki Kobayashi (1), Yukihasa Okada (1), Takaaki Shirai (1), Majid Entezarian (2), Robert Giegera (2), (1) 3M Japan Innovation, Purification and Separation Science Division (2) 3M, Purification and Separation Science Division
*Chemistry for Advanced Photopolymer Science*
A-81 Synthesis and Structure-Activity Relationship of N-Substituted Carbazole Oxime Ester Photoinitiators
Huaqiao Lu, 〇Zhiquan Li, Jiangnan University
A-82 Suppressed Oxygen Inhibition in UV Curable Formulations Using A Diene as an Additive
Haruyuki Okamura (1), Yuuki Nishijima (2), Daiki Noguchi (2), Takashi Fukumoto (2), Yutaka Suzuki (2), (1) Osaka Prefecture University, (2) Kuraray
A-83 Synthesis of Photo-degradable Polyphthalaldehyde Macromonomer and Adhesive Property Changes of its Copolymer with Butyl Acrylate on UV-irradiation
Hirokazu Hayashi (1), Hideki Tachi (1), Kanji Suyama (2), (1) Osaka Research Institute of Industrial Science and Technology, (2) Osaka Prefecture University
A-85 Grating Structures Formed by Scanning Wave Photopolymerization of Mesogenic Acrylate
Hirona Nakamura (1), Yoshiaki Kobayashi (1), Megumi Ota (1), Miho Aizawa (2), Atsushi Shishido (1), (1) Tokyo Institute of Technology, (2) National Institute of Advanced Industrial Science and Technology
A-86 Control of Radical Polymerization and Cationic Polymerization in Photocurable Resin for 3D Printers
Kotaro Kobayashi (1), Hirohumi Takamatsu (1), Tatsuo Taniguchi (1), Tatsuo Taniguchi (1), Hiroaki Okamoto (2), Takashi Karatsu (1), (1) Chiba University, (2) Okamoto Chemical Industry
A-87 Effect of using Acrylic and Epoxy Hybrid Cross-linker on the Mechanical Strength of Photo-curable Resin 3D-Printing
Hirofumi Takamatsu (1), Miharu Ito (1), Tatsuo Taniguchi (1), Hiroaki Okamoto (2), Takashi Karatsu (1), (1) Chiba University, (2) Okamoto Chemical Industry
A-88 Moving towards Non-toxic, Completely Safe Light-cured Dental Materials: Novel Effective Photoinitiators for the Production of Dental Fillings
Monika Topa (1), Joanna Ortyl (1,2), (1)Cracow University of Technology, (2) Photo HiTech Ltd.
*Organic and Hybrid Materials for Photovoltaic and Optoelectronic Devices*
A-89 Halide Perovskite Artificial Synapses and Quantum Emitters [Invited] (30 min.)
Hao-Wu Lin, National Tsing Hua University
A-90 Spray-Coating Process for Perovskite Solar Cells Application [Invited] (30 min.)
Cheng-Liang Liu, National Taiwan University
A-91 Top Thermal Annealing Effect on 2D/3D Lead Halide Perovskite: Anisotropic Photoconductivity and Vertical Gradient of Dimensionality [Invited] (30 min.)
Rei Shimono, Yoshiyuki Murakami, Ryosuke Nishikubo, ○Akinori Saeki, Osaka University
A-92 Metal Halide Hybrid Perovskites for High-Performance LED and Laser Devices [Invited] (30 min.)
Toshinori Matsushima, Chihaya Adachi, Kyushu University
A-93 Photoinduced Charge Carrier Dynamics of Semiconductor Nanocrystals for Photovoltaic Application [Invited] (30 min.)
Safna Ravindi Padmaperuma (1), Samuel Chan (1), Hanming Liu (1), Ryosuke Nakamura (2), ○Yasuhiro Tachibana (1,2), (1) RMIT University, (2) Osaka University
A-94 The Benefits of Ionic Liquids for High Efficiency and Stable Perovskite Solar Cells
Md. Shahiduzzaman, Tetsuya Taima, Kanazawa University
A-95 Application of NiO Biosynthetic as Thin Film Hole Transporting Layer for Inverted Perovskite Solar Cells
Ersan Y. Muslih, Md. Shahiduzzaman, Tetsuya Taima, Kanazawa University
A-96 Toward Efficient and Stable Perovskite Solar Cells by Using Double-Sided CsI Intercalation Into MAPbI3 Framework
LiangLe Wang (1), Md. Shahiduzzaman (2), Masahiro Nakano (3), Tetsuya Taima (1,2,3), (1) Graduate School of Frontier Science Initiative, Kanazawa University, (2) Nanomaterials Research Institute, Kanazawa University, (3) Graduate School of Natural Science and Technology, Kanazawa University
A-97 Surface and Interface Electronic Structure of Quasi-2D Perovskite
Abduheber Mirzehmet (1), Tomoki Ohtsuka (2), Syed A. Abd. Rahman (2), Takumi Aihara (2), Muhammad Akmal Kamarudin (3), Shahrir Razey Sahamir (3), Shuzi Hayase (3), Tomoki Yuyama (2), Peter Krüger (4,5), Hiroyuki Yoshida (4,5), (1) Electronics and Photonics Research Institute, The National Institute of Advanced Industrial Science and Technology (AIST), (2) Graduate School of Science and Engineering, Chiba University, (3) Info-Powered Energy System Research Center (i-PERC), The University of Electro-Communications, (4) Graduate School of Engineering, Chiba University, (5) Molecular Chirality Research Center, Chiba University
A-98 Effect of 2-Propanol Immersing on Organohalide Perovskite Layer in Perovskite Solar Cells Fabricated by Two-Step Method
○Daiki Okawa, Yoshiyuki Seike, Tatsuo Mori, Aichi Institute of Technology
A-99 Molecular Design of High-Performance Materials for Non-Fullerene Organic Solar Cells [Invited] (30 min.)
He Yan, Hong Kong University of Science and Technology (HKUST)
A-100 Materials and Devices Towards High-Performance Organic Solar Cells and Photodetectors [Invited] (30 min.)
Fei Huang, South China University of Technology
A-101 Formation of Stable Heterojunction by Sequential Solution Deposition of Organic Semiconductors [Invited] (30 min.)
Ka Yeon Ryu, ○Kyungkon Kim, Ewha Womans University
A-102 Exciton Binding Energy of Organic Solar Cell Materials [Invited] (30 min.)
Hiroyuki Yoshida (1,2), Ai Sugie (3), Kosuke Terado (3), Kyohei Nakano (4), Keisuke Tajima (4), Itaru Osaka (5), (1) Graduate School of Engineering, Chiba University, (2) Molecular Chirality Research Center, Chiba University, (3) Graduate School of Science and Engineering, Chiba University, (4) CEMS, RIKEN, (5) Graduate School of Engineering, Hiroshima University
A-103 Photon Upconversion at Organic Semiconductor Interface [Invited] (30 min.)
Seiichiro Izawa, Institute for Molecular Science
A-104 Thick-Film Polymer Solar Cells with Excellent Fill Factor
Tsubasa Mikie, Itaru Osaka, Hiroshima University
A-105 Synthesis, Properties, and Photovoltaic Characteristics of Arch- and S-Shaped Naphthobisthiadiazole-Based Acceptors
Seihou Jinnai, Shreyam Chatterjee, Yutaka Ie, Osaka University
A-106 Improved Hole-Transporting Properties in Conjugated Polymers Mixed with Polystyrene as an Insulating Polymer
Yuya Horiuchi, Midori Koshiro, Hyung Do Kim, Hideo Ohkita, Kyoto University
A-124 Analyses of Charge Accumulation of PTzBT Ternary
Polymer Solar Cells Using ESR Spectroscopy [Invited](30min.)
Dong Xue, ○Kazuhiro Marumoto, University of Tsukuba
*Fundamentals and Applications of Biomimetics Materials and Processes*
Keynote Lecture A-107 Observe Living/Wet Organisms with a Scanning Electron Microscope by NanoSuit Method (30 min.)
Takahiko Hariyama, Yasuharu Takaku, Chiyo Senoh, Hideya Kawasaki, Hamamatsu University School of Medicine
A-108 From Insect Wings to Biomimetic Applications [Invited] (25 min.)
Hamed Rajabi, Kiel University Canceled
A-109 Self-Healble Superhydrophobic and Superhydrophilic Materials [Invited] (25 min.)
Atsushi Hozumi, National Institute of Advanced Industrial Science and Technology (AIST)
A-110 A study on Ant Colony Optimization
Tomohisa Takimi, Digital Strategy Department, Yamato Holdings
A-111 Effect of Microstructure Inspired by Living Organism on Biofilm Growth Suppression,
Mariko Miyazaki (1), Akihiro Miyauchi (2), (1) Hitachi, (2) Tokyo Medical and Dental University
A-112 The pre-settlement behaviors of barnacles on antifouling microtopographic surfaces
Takayuki Murosaki (1), Yasuyuki Nogata (2), Yuji Hirai (3), (1) Asahikawa Medical University, (2) Central Research Institute of Electric Power Industry, (3) Chitose Institute of Science and Technology
A-113 Direct Observation of Gastropod's Locomotion for Soft Robot Application
Kazuki Maeda (1), Fujio Tsumori (2), (1) Department of Mechanical Engineering, Kyushu University, (2) Department of Aeronautics and Astronautics, Kyushu University
A-114 Soft Actuator with DN-gel Dispersed with Magnetic Particles
Shutaro Shigetomi (1), Fujio Tsumori (2), (1)Department of Mechanical Engineering, Kyushu University, (2)Department of Aeronautics and Astronautics, Kyushu University
A-115 Glass Microchannel Formation by Mycelium
Daiki Sato (1), Fujio Tsumori (2), (1)Department of Mechanical Engineering, Kyushu University, (2)Department of Aeronautics and Astronautics, Kyushu University
A-116 Finite Element Analysis of Advanced Imprint Process to Multilayered Material
Kazuki Tokumaru (1), Tsuyoshi Miyata (1), Fujio Tsumori (2), (1)Department of Mechanical Engineering, Kyushu University, (2)Department of Aeronautics and Astronautics, Kyushu University
A-117 Formation of Microstructure on Poly(methyl methacrylate) Film using Atmospheric Pressure Low Temperature Plasma
Masashi Yamamoto (1), Youichiro Mori (1), Takuya Kumagai (1), Atsushi Sekiguchi (2), Hiroko Minami (3), Hideo Horibe (4), (1)National Institute of Technology, Kagawa College, (2)Osaka Prefecture University, (3)Litho Tech Japan, (4)Osaka City University
A-118 Water-repellency Function of Water Strider by Curvature Shape of Micro-hairs
Kaoru Uesugi, Ibaraki University
A-119 Free-Energy Description of Pinning Effect in Wetting Phenomena of Rough Surface
Hiroyuki Mayama, Asahikawa Medical University
A-120 The Development of Bile Duct Stent Having Antifouling Properties by using Atmosphere Pressure Cold Plasma
Atsushi Sekiguchi(1,3,5), Masashi Yamamoto(2), Takuya Kumagai(2), Youichiro Mori(2), Hiroko Minami(3), Masayasu Aikawa(4), Hideo Horibe(5), (1)Osaka Prefecture University, (2)National Institute of Technology, Kagawa College, (3)Litho Tech Japan, (4)Saitama Medical University, (5)Osaka City University
*General Scopes of Photopolymer Science and Technology*
A-121 Solvent-dependent Assembled Structures of Azobenzene-based Chromophores
Y. Tokumura (1), ○M. Han (2), (1)Tottori University, (2)Kongju National University
A-122 Photo-induced Hydrolytic Degradation of Itaconic Acid based Bionylon Composites
Maninder Singh, Huaiyu Wang, Mohammad Asif Ali, Kenji Takada, Maiko Okajima, ○Tatsuo Kaneko, Japan Advanced Institute of Science and Technology
*Japanese Symposium: Polyimides and High Temperature Polymers -Functionalization and Practical Applications-*
*Japanese Symposium: Resist Removal, Etching and Cleaning Technology*
*Japanese Symposium: General Scopes of Photopolymer Science and Technology*